Features:
- The 330910-00-10-50-02-00 features an M10 x 1 metric thread configuration with armor protection for enhanced durability.
- This model includes a 5.0 meter total length for extended separation between probe and monitoring equipment.
- The 330910-00-10-50-02-00 offers increased chemical resistance for process compressor applications.
The 330910-00-10-50-02-00 is mechanically and electrically compatible and interchangeable with Bently Nevada's previous 3300 RAM proximity probe designs. This NSv probe features increased chemical resistance compared to the 3300 RAM probe, allowing its use in many process compressor applications where exposure to aggressive media is common. The 330910-00-10-50-02-00 enables seamless upgrades from legacy 3300 RAM installations while providing enhanced durability in chemically challenging environments.
The side-view characteristics of the 330910-00-10-50-02-00 are superior to those of the 3000-series 190 probe when gapping at the same distance from the probe target. This improved performance enables more accurate measurements in confined spaces and applications where probe orientation presents challenges. With no agency approvals required, the 330910-00-10-50-02-00 simplifies procurement and deployment for industrial monitoring applications.
The 330910-00-10-50-02-00 represents a complete solution for applications requiring M10 x 1 metric mounting threads with armor protection and a 5.0 meter extended length. This NSv probe delivers reliable vibration and position monitoring while the increased chemical resistance and superior side-view characteristics ensure long-term performance in demanding process environments. The 330910-00-10-50-02-00 maintains compatibility with legacy systems while providing significant performance improvements.
The 330910-00-10-50-02-00 Bently Nevada 3300 NSv Proximity Probes may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330910-00-10-50-02-00 3300 NSv Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330910-00-10-50-02-00 3300 NSv Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330910-00-10-50-02-00
- Condition New Original ready stock
- Product Family
330910-00-10-50-01-00,330910-00-10-50-11-00,330910-00-10-50-02-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Centrifugal compressors: Especially small, high-speed units with narrow bearing housings that cannot accommodate standard 8mm probes.
- Industrial gearboxes: Used to monitor radial vibration and axial displacement of internal gear shafts.
- Refrigeration units and pumps: Monitor rotor stability in centrifugal chillers or industrial water pumps.
- Narrow Side-Look Capability (NSv): Its design allows for measurement linearity even when metal objects (such as bearing outer rings) are present on the side very close to the probe centerline, effectively reducing errors caused by the "edge effect."
- Scale Coefficient Stability: With a standard output of 7.87 V/mm (200 mV/mil), it is more sensitive to minute vibrations than the standard 8mm system, enabling earlier detection of early faults.
- Response Efficiency: It features high-frequency response characteristics, accurately capturing dynamic vibration waveforms of high-speed rotating shafts (such as tens of thousands of revolutions per minute).
- Radial Vibration Monitoring: Installed in an X-Y dual-probe configuration on small sliding bearing equipment, it monitors the shaft orbit to diagnose imbalance, misalignment, or oil film instability.
- Axial Displacement Monitoring: Monitors the axial range of motion of small rotors to prevent dynamic and static collisions between the rotor and the casing.
- Tachometer Monitoring: Installed opposite the keyway on the shaft, it serves as a phase reference or speed sensor, providing accurate RPM data.