Features:
- Generates a self-powered AC millivolt voltage signal proportional to physical vibration velocity.
- Constructed with an internal spring-supported moving coil assembly for long-term casing measurement stability.
- Features a top-exit connector layout combined with a 10-foot stainless steel armored flexible lead.
The Bently Nevada 9200-06-01-10-00 Velocity Transducer represents a complete factory configuration consisting of universal angle calibration (-06 option), top-mount housing (-01 option), 10-foot armored cable (-10 option), and standard uncertified approval (-00 option).
Converting mechanical housing vibration directly into electrical signal output, this passive pickup feeds dynamic velocity data directly into machinery protection monitor racks or diagnostic vibration collectors.
Ensure mounting surfaces are flat and free of debris during mechanical installation, and keep the cable shield grounded at the monitor end to maintain optimal signal-to-noise ratio.
Availability: In Stock - Standard Global Dispatch Available
Bently Nevada 9200-06-01-10-00 Velocity Transducer Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Monitors dynamic housing movement on heavy industrial fans and centrifugal blowers.
- Detects structural mechanical looseness and unbalance on large induction motor bearing housings.
- Provides continuous vibration sensing across multi-stage gearbox assemblies and process pumps.
- Delivers a calibrated nominal sensitivity of 20 mV/mm/s (500 mV/in/s) with a low transverse sensitivity under 10%.
- Maintains linear amplitude response within 5% from 0.254 mm/s to 127 mm/s (0.01 to 5.0 in/s) velocity range.
- Withstands maximum physical mechanical acceleration shocks up to 50 g peak along its non-sensitive axis.
- Connects directly to Bently Nevada 3500/3300 machinery protection monitor racks and velocity processing modules.
- Interfaces seamlessly with portable vibration data collectors and online plant asset management systems.
- Integrates into standard PLC or DCS dynamic analog input cards via field-installed terminal junction boxes.
- Specified under Option -00 for standard non-hazardous industrial plant area installation without safety barriers.
- Encased in a hermetically sealed stainless steel housing to isolate internal moving components from contaminants.
- Complies with European Directive standards for Electromagnetic Compatibility (EMC) in heavy industrial environments.