Features:
- 1.5 m bottom extender cable for DeltaV M-series carriers
- 44-pin LocalBus connection between supported horizontal carrier sections
- Defined 6.5 m combined carrier-and-extender planning limit
KJ4002X1-BF4 extends the DeltaV M-series LocalBus from one supported horizontal carrier section to the next using a 1.5 m cable.
The BF4 suffix identifies the exact length and bottom-extender role, which must be matched instead of assuming another KJ4002 cable is equivalent.
Cabinet planning should keep the complete carrier-and-extender path within its limit and apply the required conduit method when routing between enclosures.
For KJ4002X1-BF4 1.5 m 44-Pin Extender Cable sourcing, Apter Power can help confirm the Emerson suffix, carrier interfaces and DeltaV cabinet routing.
Emerson KJ4002X1-BF4 1.5 m 44-Pin Extender Cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Function: Bottom extender for horizontal carriers.
- Length: 1.5 m.
- Interface: 44-pin LocalBus connection.
- Supported use: Links compatible M-series carrier sections.
- Total run: Carriers and extenders must remain within 6.5 m.
- Suffix control: BF4 identifies the required cable length.
- Energy isolation: De-energize before connection changes.
- Enclosure crossing: Use the required conduit arrangement.
- Mechanical check: Inspect both connectors and strain relief.
- Protection: Install within a suitable cabinet.
- Cabinet expansion: Separates supported horizontal carrier groups.
- LocalBus continuation: Carries power and bus connections to the next section.
- Maintenance replacement: Replaces an exact 1.5 m BF4 extender cable.