Features:
- Conditions signals from six documented PR64xx eddy-current sensor families.
- Supports static and dynamic measurements across a 0–20 kHz frequency range.
- Uses a compact panel-mount housing with a documented 120 g unit weight.
The current ordering configuration is CON021, the panel-mounted EPRO converter for specified PR642x and PR6453 eddy-current sensor chains.
It excites and conditions the connected probe signal so displacement, gap or vibration information can be used by the receiving monitoring system.
Before commissioning, match the probe family, total cable, target, supply, output scale and cabinet grounding for the calibrated measurement chain.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson CON021:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Conditions radial-vibration signals from a compatible eddy-current probe.
- Processes axial-position or thrust-displacement measurements in machinery monitoring.
- Provides static gap and dynamic movement signals to an attached monitoring channel.
- The converter supports PR6422, PR6423, PR6424, PR6425, PR6426 and PR6453 probe families.
- Probe and cable selection must match the calibrated CON021 measuring system.
- Target material and converter scale must be confirmed for accurate displacement output.
- Sensor wiring enters the panel-mounted converter through the documented terminal arrangement.
- The conditioned output connects to the assigned machinery-monitoring input channel.
- Shielding and grounding must preserve signal integrity across the complete probe cable.
- The documented operating-temperature range is -30 to +100°C.
- The converter carries IP20 protection and therefore requires an appropriate cabinet environment.
- Mechanical mounting uses four screws to secure the unit in the panel assembly.