Features:
- 85-264 VAC or 100-300 VDC input range
- 30 W total regulated output capacity
- Minimum 20 ms input-power ride-through
IC693PWR321 occupies the Series 90-30 baseplate power-supply position and accepts nominal 120/240 VAC or 125 VDC input sources.
Its shared 30 W capacity supplies +5 VDC logic, +24 VDC relay circuits, and an isolated +24 VDC output while maintaining the documented ride-through interval.
Application checks should total every output load and confirm source range, protective grounding, conductor connections, baseplate type, and the exact module code.
Apter Power can quote the GE IC693PWR321 120/240 VAC, 125 VDC Standard Power Supply and review Series 90-30 loading.
GE IC693PWR321 120/240 VAC, 125 VDC Standard Power Supply Manuals, Datasheets, Links
GE IC693PWR321 120/240 VAC, 125 VDC Standard Power Supply Specs
General
- Manufacturer GE
- Model IC693PWR321
- Condition New and Original
- Product Family Series 90-30 PLC
- AC input: The operating range is 85 to 264 VAC at 47 to 63 Hz.
- DC input: The operating range is 100 to 300 VDC.
- Capacity: The combined regulated output capacity is 30 W.
- Outputs: The supply provides +5 VDC, +24 VDC relay, and isolated +24 VDC.
- Current limit: Output protection limits current under excessive loading.
- Inrush: The documented maximum input inrush is 4 A peak.
- Ride-through: The minimum ride-through time is 20 ms.
- Grounding: Protective grounding must follow the Series 90-30 installation manual.
- Position: Install the supply in the leftmost baseplate slot.
- Source: Confirm the input source and terminal selection before wiring.
- Load: Add all baseplate and field loads before checking the 30 W limit.
- Safety: Remove input power before installing or servicing IC693PWR321.