Features:
- Eight Discrete AC Output Circuits
- Documented for 120/240 VAC Service
- Two-Ampere Output Rating
GE IC693MDL330 is an eight-circuit discrete output module for the Series 90-30 platform. Emerson documentation identifies the output service as 120/240 VAC with a 2 A rating.
The module is listed among supported Series 90-30 discrete output modules in PACSystems RX3i documentation. Field voltage, connected load, wiring, and target rack configuration should be verified before installation.
Use the complete catalog number and confirm the field circuit and controller configuration before replacement.
GE IC693MDL330 Manuals, Datasheets and Technical Resources
Documentation Note: Documentation availability and product compatibility are confirmed during quotation.
- Provides eight discrete AC output circuits.
- Official documentation identifies an eight-output class.
- The module is intended for Series 90-30 output control.
- Use the configured output references defined by the controller project.
- Documented output voltage class is 120/240 VAC.
- Documented output rating is 2 A.
- Connected loads must remain within the applicable module limits.
- Confirm field voltage before wiring or replacement.
- Verify the target rack and controller configuration.
- Record field wiring and output assignments before removal.
- Confirm voltage and load requirements for each connected circuit.
- Check output operation after installation.
- Eight-point AC output control in Series 90-30 systems.
- Maintenance of documented PACSystems RX3i configurations.
- Replacement of an installed IC693MDL330 output module.
- Connection to compatible AC field loads within documented ratings.