Features:
- Divides sixteen 240 VAC inputs into two isolated groups of eight.
- Recognizes 155–265 VAC as on while keeping 0–40 VAC in the off region.
- Limits both on and off transitions to 20 ms maximum.
IC670MDL241 divides sixteen 240 VAC inputs into two isolated eight-point groups, allowing separate field commons within one module.
The input circuitry covers 0–265 VAC at 47–63 Hz and identifies 155–265 VAC as the valid on-state range.
Both on and off transitions are specified at 20 ms maximum, providing a consistent timing limit for higher-voltage AC monitoring.
The General Electric IC670MDL241 240 VAC Grouped Discrete Input Module may remain purchasable and supportable through Apter Power beyond the manufacturer's End-of-Life (EOL).
General Electric IC670MDL241 240 VAC Grouped Discrete Input Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
General Electric IC670MDL241 240 VAC Grouped Discrete Input Module Specs
General
- ManufacturerGeneral Electric
- ModelIC670MDL241
- ConditionNew Original ready stock
- Product FamilyGE Genius I/O
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Dual-Group Input Architecture:
- Input capacity: 16 AC input points
- Group division: Two isolated groups with 8 inputs per group
- Field range: 0–265 VAC at 47–63 Hz
- Input current: 8.2 mA typical per point at 240 VAC
240 VAC State Recognition:
- On-state range: 155–265 VAC
- Off-state range: 0–40 VAC
- Nominal application: 240 VAC field status circuits
- Group isolation: Separate field commons are available for the two 8-point groups
High-Voltage Input Timing:
- Turn-on response: 20 ms maximum
- Turn-off response: 20 ms maximum
- BIU current: 77 mA maximum
- System interface: Field Control Bus Interface Unit