Features:
- Nine barrier-style connection points
- One internally common electrical node
- One or two conductors accepted at each terminal
IC670TBM001 expands the available landing points without creating additional isolated circuits; all nine positions intentionally share the same potential.
Its barrier layout is useful where larger field conductors or paired connections must be organized beside an analog or high-density discrete terminal base.
Circuit identification is important because the common internal bus must not combine unrelated returns, grounds, or voltage levels.
The General Electric IC670TBM001 Auxiliary Terminal Block with Barrier-Style Terminals may remain available for quotation and legacy-system support through Apter Power.
General Electric IC670TBM001 Auxiliary Terminal Block with Barrier-Style Terminals Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
General Electric IC670TBM001 Auxiliary Terminal Block with Barrier-Style Terminals Specs
General
- ManufacturerGeneral Electric
- ModelIC670TBM001
- ConditionNew Original ready stock
- Product FamilyField Control Distributed I/O
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Barrier Connection Capacity
- Positions: Nine barrier-style terminals are available.
- Conductor count: Each position accepts one or two conductors within the stated size limit.
- Wire size: Conductors up to AWG 14 are supported.
- Separation: Barrier construction helps organize adjacent field wires.
Common-Point Expansion
- Internal bus: All nine terminals are electrically connected together.
- Analog systems: The block can provide additional return or common points for analog wiring.
- Discrete systems: High-density discrete installations can use the shared node where the design permits.
- Identification: Label the common potential to prevent mixed-circuit connections.
Terminal-Base Attachment
- Location: Install the auxiliary block beside the compatible I/O terminal block.
- Retention: Secure the accessory using the documented attachment method.
- Access: Preserve screwdriver and conductor-bend clearance.
- Verification: Continuity and circuit potential should be checked before field power is applied.