Features:
- BPPC processing with RAM and flash memory
- Two independent 10/100 Ethernet interfaces
- Watchdog, temperature sensing, status LEDs, and electronic ID
IS210BPPCH1AD supplies the embedded processor resources used by a compatible Mark VIe I/O-pack assembly rather than acting as a standalone field module.
At startup, the processor validates connected-board identification, initializes Ethernet, obtains its network address, and participates in synchronized IONet data exchange.
Migration or replacement must be planned around the exact I/O-pack assembly, ControlST version, applicable I/O upgrade, firmware compatibility, and redundancy architecture.
The GE IS210BPPCH1AD Mark VIe BPPC I/O Pack Processor Board is listed as Active / Available from OEM. Apter Power can support quotation and configuration matching.
GE IS210BPPCH1AD Mark VIe BPPC I/O Pack Processor Board Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
GE IS210BPPCH1AD Mark VIe BPPC I/O Pack Processor Board Specs
General
- ManufacturerGE
- ModelIS210BPPCH1AD
- ConditionNew Original
- Product FamilyMark VIe BPPC
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Embedded processing resources
- Memory: RAM and flash memory support operating code and local I/O processing.
- Supervision: A hardware watchdog timer and reset circuit supervise processor operation.
- Temperature: An internal sensor supports processor temperature monitoring.
- Identification: Electronic ID functions verify the matching internal board assembly at startup.
IONet communication behavior
- Ports: Two fully independent 10/100 Ethernet interfaces are provided.
- Addressing: The processor requests a network address after Ethernet initialization.
- Synchronization: IEEE 1588 timing synchronizes the I/O pack over IONet.
- Status: Embedded link and activity indications support network troubleshooting.
Compatibility review points
- Software: Confirm that the ControlST release satisfies the applicable BPPC migration requirement.
- Upgrade package: Apply the GE BPPC I/O upgrade procedure specified for the installed platform.
- Assembly match: Verify the complete processor and associated I/O-board identification before installation.
- Redundancy: Review simplex, dual, or TMR requirements before exchanging hardware.