- Vertical electrodynamic velocity measurement
- 3 m armored cable for protected signal routing
- Harting plug ordering configuration
PR9268/200-000 is the vertical configuration in the Epro PR9268 electrodynamic velocity-sensor family.
Its spring-mass generator produces a velocity-proportional signal for absolute case-vibration monitoring without an external sensor-excitation supply.
Selection and installation depend on the complete ordering code, mounting direction, receiving monitor, cable routing, connector, and applicable approvals.
Availability, condition, price, and shipping time for PR9268/200-000 are confirmed during quotation.
Epro PR9268/200-000 Electrodynamic Velocity Sensor Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The /20 configuration is specified for vertical measurement.
- Mounting direction is part of the sensor identity and must be preserved.
- The installation surface and fastener condition affect vibration transfer.
- Nominal sensitivity is 28.5 mV/mm/s.
- The documented frequency range is 4 to 1000 Hz.
- The receiving monitor input and cable shield arrangement require verification.
- The documented temperature range is -20°C to +100°C.
- The enclosure protection rating is IP55.
- Relative humidity is 0 to 100% under non-condensing conditions.
- Absolute case-vibration monitoring on steam, gas, and hydro turbines.
- Machinery protection measurements on compressors.
- Case-vibration measurement on industrial pumps and fans.