Features:
- Provides six 10/100 Mbps copper access ports for local DeltaV network connections.
- Includes two 10/100 Mbps copper uplink ports within an eight-port switch configuration.
- Supports 24 VDC operation in a compact DIN-rail industrial enclosure.
The current ordering configuration is FP20-6TX2TX, the VE6041 DeltaV Smart Switch with six access ports and two copper uplinks.
It provides managed Ethernet switching for supported DeltaV control-network equipment in an industrial cabinet.
Before commissioning, verify 18-30 VDC power, DIN-rail clearance, copper cabling, port assignments and the DeltaV network design.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson FP20-6TX2TX:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Connects supported DeltaV controllers and network devices across managed 10/100 Mbps copper Ethernet segments.
- Provides local access switching where six field-facing copper ports and two copper uplinks are required.
- Supports cabinet-mounted industrial control networks that require a compact DIN-rail switch powered from 24 VDC.
- Six 10/100BASE-TX copper ports provide local device connections for the DeltaV control network.
- Two 10/100BASE-TX copper uplink ports connect the switch to the wider control-system topology.
- A V.24 service interface and USB connection support documented local access and maintenance workflows.
- The IP20 enclosure rating is intended for protected cabinet installation rather than exposed outdoor service.
- The 74 x 131 x 111 mm housing mounts on standard DIN rail within the documented control enclosure.
- The switch operates from the published 18 to 30 VDC input range around a nominal 24 VDC supply.
- The USB interface supports the documented flash-based firmware update procedure for DeltaV Smart Switches.
- Local service access is provided through the V.24 interface using the documented connection method.
- Firmware and configuration revisions should be checked for compatibility with the installed DeltaV system release.