Features:
- Terminates thirty-two discrete field circuits through the matched S-series terminal-block assembly.
- Uses rotary mechanical keying to align the termination hardware with its intended I/O card.
- Supports installation in the specified hazardous-area classifications when all stated conditions are met.
The current ordering configuration is KJ4006X1-BF1, the DeltaV S-Series Discrete 32-Channel Terminal Block documented by Emerson for DeltaV S-Series Traditional I/O.
KJ4006X1-BF1 is used in S-Series cabinets that marshal 32-channel discrete field wiring. Its system role and configuration limits must remain aligned with the official specification.
Before commissioning KJ4006X1-BF1, verify the installed assembly, project wiring, power, software and environmental conditions that apply to this exact part number.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ4006X1-BF1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Marshals thirty-two discrete field circuits in compatible DeltaV S-series control cabinets.
- Supports hazardous-area I/O assemblies designed for the specified Zone 2 or Division 2 conditions.
- Allows terminal-block replacement while preserving the established key position and field connections.
- Set the rotary key positions before installing the associated I/O card.
- Land field conductors only on the terminals assigned by the project drawings.
- Remove field power before disturbing connected wiring.
- Operates within the specified -40 to +70°C ambient range when installed correctly.
- Permits 5 to 95 percent relative humidity provided condensation cannot form on the assembly.
- Requires enclosure practices appropriate for ISA Class G3 airborne contaminant exposure.
- Apply the II 3G Ex ec IIC Gc marking only under the stated conditions.
- Follow the referenced DeltaV Zone 2 installation instructions.
- Verify the product label for the applicable serial and approval markings.