Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power supports PR6423/008-110 documentation, compatibility review and quotation.

PR6423/008-110

/ 4.9
1001 reviews | Need a Specific Revision?
Emerson PR6423/008-110 is a compact PR 8 mm eddy-current probe with a 105 mm M10 x 1 body and integral 5 m LEMO-terminated cable for restricted-access shaft measurements.
In Stock
Ships by Friday, October 30
Fast Shipping Available
Get a quick price for PR6423/008-110
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for PR6423/008-110

  • Manufacturer:
    Emerson
  • Part Number:
    PR6423/008-110
  • Product Family:
    Epro
  • Product Type:
    PR 8 mm Eddy-Current Displacement Sensor
  • Stock:
    1
  • Probe Family:
    PR 8 mm
  • Mounting Thread:
    M10 x 1
  • Probe Length:
    105 mm
  • Cable:
    5 m
  • Termination:
    LEMO connector
  • Linear Measuring Range:
    2 mm
  • Nominal Sensitivity:
    8 V/mm
  • Operating Temperature:
    -35 to +180°C for sensor and first 1 m cable
  • Protection Class:
    IP66
  • Tariff Code:
    9031809090
  • Country of origin:
    Germany
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Applications Efficiency Environment Installation

Features:

  • Uses a compact 8 mm sensing tip for non-contact shaft observation in restricted mounting locations.
  • Provides a 105 mm M10 x 1 threaded body for extended reach through the machine housing.
  • Terminates the integral 5 m lead with a LEMO connector for the matched converter interface.
The current ordering configuration combines the PR 8 mm sensing format with the long 105 mm body and factory-defined connector lead.

Its small probe diameter supports radial vibration and axial-position measurements on rotating equipment where larger probes may not fit the available geometry.

Set the cold gap with the approved converter and target material, then secure the body, cable and connector without altering the calibrated lead length.

Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson PR6423/008-110: Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Supports radial shaft-vibration monitoring where an 8 mm probe can be mounted close to a smaller rotating target.
  • Tracks axial movement at thrust-position points that require the reach of a 105 mm threaded sensor body.
  • Feeds continuous gap and motion data to a matched machinery-protection converter through the fixed LEMO connection.
  • The sensor family provides a 2 mm linear measuring range when matched to its calibrated converter.
  • Nominal sensitivity is 8 V/mm for the complete approved measuring chain.
  • Non-contact operation avoids mechanical loading of the monitored shaft surface.
  • The sensor and first metre of cable are rated from -35 to +180°C.
  • The installed sensor housing provides IP66 protection under the documented conditions.
  • Cable routing must respect temperature exposure, chemical compatibility and mechanical protection.
  • The M10 x 1 thread and 105 mm probe length must match the machine bracket.
  • Set the initial gap within the linear range using the complete calibrated converter chain.
  • Route the 5 m cable to the LEMO connection without tight bends, crushing or unapproved splices.
Description
PR6423/008-110 is the 8 mm eddy-current probe configuration with a 105 mm threaded body, M10 x 1 mounting and an integral 5 m lead ending in a LEMO connector.

The narrow probe geometry supports non-contact observation of radial vibration or axial position where machine clearances favor a smaller sensor body. A matched EPRO converter completes the calibrated measurement chain.

Confirm the converter type, target material, initial gap, mounting depth and connector routing against the machine drawing. Preserve the supplied cable length and bend radius during installation.
Alternative Names
PR6423/008-110 Emerson PR6423/008-110 PR6423 008 110 PR6423-008-110 PR6423008110 Emerson AMS 6500 Machinery Health PR6423/008-110 Emerson PR 8 mm Eddy-Current Displacement Sensor Emerson PR 8 mm Eddy-Current Displacement Sensor PR6423/008-110
Technical notes
Do not cut or extend the factory 5 m lead on PR6423/008-110; verify probe gap, LEMO connection, target material, and matched converter calibration.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Which installation characteristics must be reconciled before ordering PR6423/008-110?
Check the machine bracket and thread, available probe reach, cable route, LEMO interface and target geometry against the complete /008-110 construction.
How is the calibrated measurement chain selected for PR6423/008-110?
Use the converter and any extension components specified for the PR6423 probe family, target material, cable arrangement and required scale.
How can PR6423/008-110 serve either radial or axial machinery measurements?
The mounting direction and machine target determine whether the probe observes shaft vibration or axial position; the installed gap must remain in the approved linear region.
What connector evidence helps confirm PR6423/008-110 stock before shipment?
Include the full suffix, a clear photo of the LEMO termination, required quantity, destination and any converter already assigned to the machine.
Can a PR6424 16 mm probe replace PR6423/008-110 in the same bracket?
No direct interchange should be assumed because probe diameter, mounting thread, measuring scale, sensitivity and converter requirements differ.
Which source resolves the construction code of PR6423/008-110 for an RFQ?
Use the Emerson PR6423 data sheet together with the official PR642x ordering matrix, and attach the machine mounting drawing and converter identification.

Product Browsing History