- Sixteen sourcing outputs are arranged as two independently commoned groups of eight
- Each point is rated for up to 0.5 A within the documented two-ampere common limit
- Two-millisecond maximum on and off response supports general-purpose discrete actuation
IC694MDL740 is a General Electric PACSystems RX3i digital output module designed for 12/24 V DC positive-logic field loads.
The module switches user-supplied positive voltage to sixteen output points arranged in two groups, with each group using its own common power terminal.
Before installation or replacement, verify the load polarity, field-supply range, point and common current, inrush demand, terminal assignments, protective devices, and saved RX3i configuration.
Availability, condition, price, and shipping time for IC694MDL740 are confirmed during quotation.
General Electric IC694MDL740 16-Point 12/24 V DC Positive-Logic Output Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The sixteen outputs are divided into two groups of eight points
- Each eight-point group uses a separate common power output terminal
- Positive-logic operation sources current to loads connected toward the negative field-power bus
- Continuous output current is limited to 0.5 A per point
- Combined output current is limited to 2 A at each common terminal
- The documented inrush limit is 4.78 A for 10 ms
- Output devices require a separately supplied 12/24 V DC field-power source
- IC694MDL740 can occupy an I/O slot in a PACSystems RX3i system
- The RX3i system manual lists IC694MDL740 as hot-swap compatible under the documented procedure
- Discrete actuator control in complex PACSystems RX3i machines
- On/off field-load control in industrial process-control systems
- Auxiliary discrete-load switching in motion-control applications