Features:
- Extends an RX3i Universal Backplane to serial expansion racks.
- Interfaces with supported IC694 and IC693 expansion backplanes.
- Occupies the dedicated rightmost expansion position.
Signal-level conversion bridges the Universal Backplane and the Series 90-30-style serial expansion bus.
Supported expansion cables determine rack spacing and installation topology.
Rack power must be removed before this module is inserted or removed.
General Electric IC695LRE001 PACSystems RX3i Serial Bus Transmitter Module is available for quotation and official technical-file access.
General Electric IC695LRE001 PACSystems RX3i Serial Bus Transmitter Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IC695LRE001 Supported Backplanes
- Local side: A 12-slot or 16-slot Universal Backplane is required.
- Remote side: IC694 serial expansion racks are supported.
- Legacy side: Compatible IC693 backplanes may be linked.
- Bus role: The module converts local signals for serial transfer.
IC695LRE001 Dedicated Slot Position
- Required location: Use the far-right expansion slot.
- Ordinary slots: Standard I/O positions are not valid.
- Rack planning: Reserve the position before assigning other modules.
- Replacement: Match slot and cable topology exactly.
IC695LRE001 Expansion Cable Choices
- CBL300/301: Short and standard expansion links are available.
- CBL302: Additional approved expansion cabling is supported.
- CBL312/313: Longer or specialized links use these assemblies.
- Connector check: Secure every connector and strain relief.
IC695LRE001 De-Energized Maintenance
- Hot insertion: The transmitter cannot be hot inserted.
- Power isolation: Switch rack power off first.
- Bus integrity: Avoid disturbing downstream connectors unnecessarily.
- Restart check: Confirm all remote racks return after power-up.