Features:
- Supplies 350 W for heavily populated RX7i racks.
- Accepts the same wide-range AC/DC sources as the 100 W unit.
- Requires the specified RX7i fan tray for continuous operation.
High rail capacity supports racks with multiple power-intensive VME modules.
Thermal design depends on forced airflow, so fan status is part of the power-supply health check.
The combined output rating and each rail maximum are both enforced during load planning.
General Electric IC698PSA350 PACSystems RX7i 350-Watt AC/DC Power Supply is available for quotation and official technical-file access.
General Electric IC698PSA350 PACSystems RX7i 350-Watt AC/DC Power Supply Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IC698PSA350 Wide-Range Input
- AC voltage: The accepted range is 85–264 VAC.
- Line frequency: AC input operates from 47 to 63 Hz.
- DC voltage: The accepted range is 100–150 VDC.
- Branch circuit: Protection and conductors match maximum demand.
IC698PSA350 High-Capacity Rails
- Total power: Combined output is limited to 350 W.
- Five volts: Up to 60 A is available.
- Positive twelve: Up to 12 A is available.
- Negative twelve: Up to 4 A is available.
IC698PSA350 Required Forced Air
- Fan tray: A compatible RX7i tray is mandatory.
- Air path: Filters and rack clearance remain unobstructed.
- Fan alarm: Loss of airflow is corrected immediately.
- Ambient: Cabinet temperature stays within system limits.
IC698PSA350 Supply Fault Handling
- Short circuit: Output fault protection is included.
- Overvoltage: Rail voltage is monitored.
- Overtemperature: Thermal protection limits damage.
- Ride-through: One AC cycle bridges short dips.