- Modular IAM power section for separately selected Kinetix 6200 or Kinetix 6500 control hardware
- Integrated converter and one inverter position in one Bulletin 2094 module
- Supports additional Bulletin 2094 axis modules on a correctly sized common power rail
2094-BC01-MP5-M provides the line-side conversion function and the first inverter position for a modular Kinetix 6200/6500 power-rail system.
Its modular design lets the same power hardware be paired with the control architecture required by the installed machine while the IAM supplies the shared DC rail for permitted added axes.
Confirm the control module, power-rail catalog number, total rail load, motor-feedback combination, cable set, branch protection, shunt duty, and enclosure design before commissioning.
Availability, condition, price, and shipping time for 2094-BC01-MP5-M are confirmed during quotation.
Allen-Bradley 2094-BC01-MP5-M Kinetix 6200/6500 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- A Kinetix 6200 control module provides the SERCOS interface architecture when fitted to the IAM
- A Kinetix 6500 control module provides Integrated Motion over EtherNet/IP when fitted to the IAM
- The selected control module and firmware must match the installed controller and safety design
- Motor and feedback combinations must be selected from the applicable Rockwell Automation compatibility tables
- The feedback connector kit and 2090-series cable set must match the selected motor interface
- Replacement work must preserve the control-module, power-module, and firmware compatibility combination
- The IAM occupies the converter position at the left side of a supported Bulletin 2094 power rail
- Additional axis modules are installed to the right within the permitted rail and converter capacity
- Unused rail positions and shunt hardware must follow the Bulletin 2094 installation instructions
- Kinetix 6200 multi-axis servo systems using a SERCOS interface control module
- Kinetix 6500 multi-axis servo systems using an EtherNet/IP control module
- Bulletin 2094 power-rail systems that require an integrated converter and one lower-current inverter position