Features:
- Executes Mark VIe control applications on a QNX real-time platform.
- Provides six Ethernet interfaces for control, I/O, and external communication.
- Uses IEEE 1588 timing on IONet to coordinate controller and I/O data.
General Electric IS420UCSCH1A-H-V0.1-A combines processor, memory, solid-state storage, and network interfaces in a panel-mounted controller.
The control application exchanges distributed I/O data through network links rather than an application-I/O backplane.
Revision letters and software version are part of the exact installed identity and must not be dropped from the product name.
The General Electric IS420UCSCH1A-H-V0.1-A UCSC Industrial Controller may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IS420UCSCH1A-H-V0.1-A UCSC Industrial Controller Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Processor and storage path
- Processor: The AMD GX-412HC provides four CPU cores.
- Control execution: Two cores are allocated to Mark VIe application work.
- Memory: Four gigabytes support runtime processes and application data.
- Storage: The pSLC solid-state drive retains the operating and application image.
Deterministic I/O exchange
- IONet: The private Ethernet path carries controller and distributed-I/O data.
- Time base: IEEE 1588 coordinates timestamps across the network.
- Synchronization: The documented architecture keeps I/O timing within its required boundary.
- Redundancy: Each controller in a redundant arrangement attaches to the required I/O networks.
Six-port communication layout
- Port count: The controller provides six 100 Mbit/s Ethernet interfaces.
- PROFINET: A configured port exchanges controller data with PROFINET devices.
- HSSL: High-speed serial-link communication uses its assigned network path.
- External traffic: Plant or engineering communication remains distinct from I/O assignments.
Nameplate configuration
- Base number: IS420UCSCH1A identifies the UCSC controller family member.
- Hardware revision: H records the installed hardware revision.
- Software version: V0.1 records the visible software version.
- Variant: A completes the exact nameplate identity used for matching.