Features:
- ControlLogix in-chassis PROFIBUS DPV1 Master
- Cyclic I/O exchange with DPV0 and DPV1 devices
- ProSoft Configuration Builder and CIPconnect diagnostics
The ProSoft MVI56-PDPMV1 equips a ControlLogix processor with PROFIBUS DPV1 master communication for exchanging cyclic and acyclic data with supported field devices.
DPV0 process data and DPV1 services are handled by the in-chassis module, while controller data is transferred through the ControlLogix backplane. Configuration and diagnostic tools support network setup and device monitoring.
Because MVI56-PDPMV1 is a legacy model, verify chassis compatibility, firmware, PROFIBUS baud rate, station addresses, GSD files, termination, and existing controller logic before service or migration.
The ProSoft MVI56-PDPMV1 PROFIBUS DPV1 Master Communication Module is listed as Discontinued / Obsolete by OEM. This ProSoft PROFIBUS master module is discontinued by the OEM. Apter Power can help evaluate legacy requirements and official migration documentation.
ProSoft MVI56-PDPMV1 PROFIBUS DPV1 Master Communication Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ProSoft MVI56-PDPMV1 PROFIBUS DPV1 Master Communication Module Specs
General
- Manufacturer ProSoft Technology
- Model MVI56-PDPMV1
- Condition New Original ready stock
- Product Family MVI56 ControlLogix Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
MVI56-PDPMV1 PROFIBUS details
- Function: PROFIBUS DPV1 Master operation
- Protocol: DPV0 and DPV1 device support
- Capacity: Cyclic and acyclic data services
- Operation: Legacy installations require firmware and configuration review before migration.
MVI56-PDPMV1 ControlLogix details
- Integration: Local or supported remote-rack deployment
- Interface: Backplane I/O data exchange
- Configuration: CIPconnect Ethernet routing for diagnostics
- Application: Legacy installations require firmware and configuration review before migration.
MVI56-PDPMV1 Diagnostics details
- Diagnostics: ProSoft Configuration Builder support
- Setup: Front-panel status indicators
- Verification: Device and network commissioning tools
- Maintenance: Legacy installations require firmware and configuration review before migration.