Features:
- Single-axis Kinetix 3 drive with built-in indexing operation
- Dedicated breakout boards separate I/O and motor-feedback wiring
- Series A hardware is covered by the official product declarations
Allen-Bradley
2071-A15 serves one higher-output axis within the compact Kinetix 3 component-drive platform.
The drive is commissioned through the documented serial interface and must be paired with the supported motor, feedback device, and cable arrangement.
For a functional-replacement project, verify thermal load, controller communication, enclosure clearances, grounding, firmware, and the installed safety design.
Availability, condition, price, and shipping time for 2071-A15 are confirmed during quotation.
Allen-Bradley 2071-A15 Kinetix 3 Component Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Published power loss is 93.9 W at 100% rated output
- The enclosure design must maintain the documented ambient-temperature limits
- Clearance and airflow must follow the Kinetix 3 installation instructions
- 2071-TBIO is the documented 50-pin I/O breakout board
- 2071-TBMF is the documented 20-pin motor-feedback breakout board
- The serial interface cable must match either the PC or MicroLogix connection method
- Confirm the complete Series 1 catalog identification before loading firmware
- Verify the motor-feedback combination and connector pinout before enabling the axis
- Observe the five-minute discharge interval whenever power is removed for service
- Single-axis indexing equipment requiring the Kinetix 3 component-drive architecture
- Servo positioning systems with a supported motor and absolute-feedback option
- Standalone motion axes connected to a PC or MicroLogix through documented serial interfaces