- Single-axis Kinetix 300 platform with EtherNet/IP communications
- Removable memory-module socket supports documented parameter storage and service workflows
- Dedicated mains, DC-bus and shunt, backup-power, I/O, motor-power, and feedback connections
Allen-Bradley
2097-V33PR3 operates as one independently configured indexing axis and exchanges commands, status, and diagnostic information through its documented control interfaces.
The machine configuration includes the controller or indexing method, network and I/O assignments, motor and feedback selection, homing and limits, protection settings, and safety circuit.
Confirm the complete Series 1 nameplate, saved parameter set, connector hardware, motor and feedback cables, external shunt selection, enclosure clearances, grounding, and the engineering requirements of replacement 2198-E1007-ERS before commissioning.
Availability, condition, price, and shipping time for 2097-V33PR3 are confirmed during quotation.
Allen-Bradley 2097-V33PR3 Kinetix 300 EtherNet/IP Indexing Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The drive mounts vertically on a zinc-plated, paint-free steel subpanel
- M4 or number 6-32 steel mounting screws are tightened to 1.1 N·m
- The documented ventilation clearances must remain free of wiring and nearby equipment
- The drive provides a removable memory module socket
- Indexing, network, motor, I/O, and fault parameters should be archived before service
- The restored configuration must be checked against the complete machine commissioning record
- Safe Torque Off inputs are not designed for pulse-testing devices
- The short-circuit rating is 100,000 A rms symmetrical
- Branch protection, motor overload, grounding, and safety wiring require final validation
- Single-axis machinery using a supported Kinetix 300 motor-feedback combination
- Indexed positioning or coordinated motion according to the documented drive-family control architecture
- Legacy Kinetix axes undergoing controlled maintenance or engineered migration to 2198-E1007-ERS